|
|
All Webcams come with FREE software CD |
CCTV Equipment Software and Systems |
Camsecure CCTV |
To Our MPEG 4 Webserver and Pan & Tilt Camera Bundle Page |
Problems with "Buy Now" Buttons? Click Here |
Click Here to read more about IP Cameras |
£259.00 |
MPEG 4 Webserver with Pan, Tilt & Digital Zoom Camera |
Part of Camsecure's technical support facility is to set up Dynamic Nameservers on your behalf (if you are not sure about doing this yourself) so you can still access your cameras without a fixed IP address using a name instead of a number. Check out the Support Section for more information. |
Bundle Price £259.00 |
MPEG 4 Network CCTV Video Webserver with Audio and PTZ control using the Pelco D Superb MPEG 4 Video Webserver bundled with an excellent Motorised Pan and Tilt camera with digital zoom. The camera can be viewed from anywhere in the world via Internet Explorer or your own web pages and there is an Analogue output for local connection to a standard CCTV monitor or recorder if required. Superb performance and value for money with full technical support. |
Network: - Embedded Web server No need for PC links straight to Internet.. - 10/100 Mbps Base-T Ethernet - Network Protocols: TCP/IP, UDP, ICMP, HTTP, FTP, Telnet, SMTP, DHCP, NTP, DDNS includes most of network protocol - IEEE 802.11g wireless LAN (9320 only) Video: - NTSC / PAL Auto detection - Record to Mpeg-4 format (AVI or mpeg raw file) with D1/1/2D1/SIF/QSIF at full frame - Ideal Synchronization of Audio & Video - Auto / Manual adjust network bandwidth - Resolution: 720x576/480/288/240, 352x240/288, 176x144/122 @ 30/25 fps |
- Video Bit rate: 128K ~ 3M bits/sec (CBR/VBR configurable) - Recording& Playback: Directly control from Web Browser - Video Adjustment: Brightness, Contrast, Hue, Saturation, Frame rate, Bit rate, Bit Rate, GOP, Frame rate Audio: - G.726 U-Law/A-Low - Adjustable audio data rate, 384Kbps to 64Kbps, Sample rate: 48K Control Interface: - RS485 output for controlling PTZ camera (make sure your camera uses the protocol PELCO-D). This server won't work with any other protocol. - 6 Digital I/O interface for sensor and alarm - RS232 Interface for serial communication |
As with all Camsecure products you get full technical support and assistance with this great piece of equipment. |
Pan & Tilt Camera: - Signal System: NTSC/PAL - Image Sensor: 1/3" Sony CCD - Effective Pixels: 410K - Video S/N Ratio: 30dB - Horizontal Resolution: 480 TVL - Lens: Fixed Lens ( f= 4mm) - Panning Travel: Max 355 degrees - Tilting Travel: Max 90 degrees - Panning Speed: 25 degrees/sec - Tilting Speed: 30 degrees/sec - Interface: RS-485 - Temperature: -10C ~ 50C - Input Voltage: 12V DC - Dimension: 140(D) x 135 ( H) cm - Connector: BNC - Weight: 470g |