Low Cost IP Network Camera with additional USB input from Camsecure

Standard IP Camera with Secondary USB input for additional streaming Webcam

With this IP camera you dont need to have a PC switched on to stream video to the Internet or over your Network. It has a good crisp
picture and focusable lens.....but thats not all. With this camera you also have the added benefit of a USB input that will allow you to
connect a USB Webcam to it (not included) allowing you to stream a second camera using its internal webserver. You cant view them
both at the same time but you can remotely switch between cameras giving you two camera views over the internet at a great price.

Specification:

Additional mini USB port for second camera, VIMICRO ZC0301 Plus processor inside, Color CMOS VGA sensor with 350,000 pixels.
Picture Format: 160x120, 176x144, 320x240, 352x288, 640x480, 1024x768 (CM-03a) & 1280x1024 (future upgrade)
MJPEG compression, Up to 30fps@CIF (352x288), 10-15fps @ VGA (640x480), USB Interface, reverse compliant with USB 1.1
specifications. Focus Distance: 5cm to infinity, manually adjustable Focus Lens, Minimum illumination: 2.5 lux @f1.4
Visual angle: 51/60 degree horizontal, Auto Control for White balance, Exposure, Color/Brightness.
Operating Temperature: 0°C to +40°C. Powered by USB 5.0V

32-Bit RISC CPU inside, 1MB Flash Memory, 8MB Dynamic Memory, Operating humidity at 10% to 90%
Operating temperature at 0C to 60C, 10/100Mbps Fast Ethernet connection, Built-in USB port Supports USB 2.0 and USB1.1
Remote access using any Java enabled web browser Windows based
Network protocal: HTTP, TCP/IP, UDP, SMTP, PPPoE, DDNS, DNS, SNTP, BOOTP, DHCP, FTP, SNMP

Part of Camsecure's technical support facility is to set up Dynamic Nameservers on your behalf (if you are not sure about doing this
yourself) so you can still access your cameras without a fixed IP address using a name instead of a number. Check out the Support
Section for more information.