Weatherproof IP PTZ Dome Camera Kit

Our Weatherproof IP PTZ Webcam kit 1 will give you both local and remote internet control of the PTZ camera by using its own
software or Internet Explorer. In addition, our 9100A can be added to this kit to allow viewing only directly on your own website.

The kit comprises our CD51HW dome, Local Joystick controller, 4 channel PTZ control webserver with audio, a 20 metre cable
and all powers supply units.

The dome camera has a Sony CCD chip for great performance and can pan a full 360 degrees and tilt 90 degrees giving all round
coverage. The dome also has 4 x alarm inputs which can be connected to door contacts or movement detectors and will
automaticall Pan, Tilt, Zoom to a pre-set position when any of these inputs are triggered. The camera can also be manually
moved to any position and zoomed in for a close up via its motorised 10 x magnification zoom lens.

For local control the camera can be fully programmed and operated from the joystick controller included in the kit. This joystick is
only necessary for initial programming of the presets and other features of the dome but can be used for full control via a local
monitor if required. Once the alarm inputs are programmed, the camera can be Panned, Tilted and Zoomed remotely over the
Internet using the 9360 Webserver.

The 9360QW webserver included in this kit allows wired or wireless connection to your network and the Internet. You can
connect up to 4 cameras or PTZ cameras to it and also up to 4 microphones allowing independant PTZ viewing and control for up
to 4 separate cameras and 4 separate microphones. The 9360QW has a monitor output so you can connect a CCTV monitor to it
directly if you need local viewing without using a PC to monitor it via the network. The 9360QW must be used with Internet
Explorer or its own software and cannot be streamed directly to a web page. For that you need an additional item listed below.

How do i also use this camera for displaying on my website?

By adding our 9100A to this kit you have the best of everything. A fully programmable and controllable speed dome for local
monitoring and control. A camera that will move to a preset position when it detects an alarm input. Internet access to remotely
pan tilt and zoom the camera using Internet Explorer from anywhere in the world and a website compatable video feed (video only
- no control) which can be embedded directly in your own web pages. Note - a wired network connection is necessary for 9100A

This has the advantage that you can remotely log in and view high speed video in MPEG4 format, from up to 4 security cameras
independantly from your website and even record if you wish. If you site is set to show camera 1 for example and you decide to
alter the view you can simply log in and alter it. Your website viewers will then see the camera move to its new position. Website
viewers will only be able to see the camera you select and the view you select but only you will have full control.