|
|
To Our Dome Controller Selection Page |
Our PTZ and Speed Dome Controllers are designed to allow full control and programming of Camsecure Speed Domes and Zoom cameras. These speed dome controllers can also be programmed to operate other domes etc. using the well known PELCO protocols |
Mini Speed Dome Controller Miniature speed dome controller with keyboard and joystick and LED display, controls up to 32 speed domes, for use with our zoom cameras, PTZ cameras and high speed domes. (Including 12V DC PSU), uses Pelco-D, Pelco-P protocols at 2400, 4800 and 9600 baud. Has the facility to program presets, preset tours and patrols as well as access the OSD on all our high speed dome cameras allowing the cameras to be set up. Suitable for applications requiring a low cost joystick controller that will not be subject to heavy use. 12v regulated @ 1.2A PSU included. |
Controls all Camsecure PTZ Domes, Speed Domes, Pan and Tilt only domes and remote programmable camera's. |
Speed Dome Controller with 3D Control Speed dome controller with keyboard and 3D joystick. The joystick controls zoom in and out as well as direction. Intended for heavy use applications. Provides all the functions required to program and control speed domes, with the ability to program presets and camera settings using the on screen display. RS485 multi protocol including Pelco P / D and a LCD display to show camera selected, a 12v DC power supply is included. |
Camsecure CCTV |
CCTV Equipment Software and Systems |
Internet CCTV - Low Cost IP Camera - Weatherproof IP Camera - Aviosys Webservers - Low Cost CCTV - PTZ Webcam |
Register With Us for additional Special Offers and Discounts |
Specification * For use with any Inspire or Camsecure PTZ / speed dome * Controls and programmes all camera and PTZ functions * Can be used to give full remote control of Camsecure DVR's * Can be used with up to 4 Camsecure DVR's * Can be used with up to 255 cameras * 3D joystick for zoom control * Progressive joystick for precise control * Pelco P/D protocols 2400; 4800; 9600 baud selectable * Power input: 12v DC 250mA (PSU included) * Size: 330 x 190 x 43mm |
3D Controller rear View |