Camsecure Page Header Graphic
Camsecure Page Header 1200
Microphones for CCTV
Microphones for CCTV

A selection of sensitive audio Microphones for use with CCTV and IP cameras. These CCTV microphones can be plugged into our audio enabled IP cameras or our Digital Video Recorders to stream or record audio. There is a weatherproof model too which is ideal for use at entry gates or for adding that extra dimension to your web site webcam.

Internal Audio Microphone For CCTV

Microhone Pickup Box For CCTV

£14.99

Internal Microphone Pickup Box.  

Audio Output: Max 2V p-p
Power Supply: DC 12v
Power Consumption: 10mA
Size: 41x25x19mm (Mic Only)
Weight: 25g
Storage Temperature: -30°C~+60°
Operating Temperature: -10°C~+45°

Run this microphone from the 12 volt DC supply to the camera and position it to pick up audio in the required area. Output can be plugged directly into the audio input sockets of our Digital Video Recorders to record audio along with the camera picture.

Internal In line Microphone For CCTV

In Line Microhone Pickup For CCTV

£15.99

Internal In Line Microphone specification.  

Audio Output: Max 2V p-p
Power Supply: DC 12v
Power Consumption: 10mA
Size: 40x14.5x8mm (Mic Only)
Weight: 100g
Storage Temperature: -30°C~+60°
Operating Temperature: -10°C~+45°

This microphone plugs in line between the camera and power leads so it then provides an in line connection with an extra audio output which can be run back to our DVRs for recording audio on the same camera channel.

Internal ceiling mount microphone.

Ceiling mount microphone

£89.00

Internal ceiling mount Microphone specification.  

Sensitivity -32dB (-45~215dB adjustable)
Scope 5-100m²
Frequency Response : -20Hz ~ 20kHz
Direction Characteristic: Omni Directional
Signal to Noise Ratio: 80dB
Dynamic Range: 104dB(1kHz at max, dB SPL)
Max. sustainable sound pressure : 120dB
Output Impedence: 600 Ohm (non-equilibium)
Output Signle Amplitude: 2.5Vpp/-25dB
Working Voltage: 12V(9~15V)
Working Current: 60mA(5~100mA)
Working temperature: -30°C ~ 70°C
Dimensions: 78 x 26mm
Weight: 73g

Internal covert pinhole microphone

Covert Pin Hole Microphone

£23.00

Covert Microphone specification.  

Sensitivity -40dB (-45~20dB adjustable)
Scope 5-40m²
Frequency Response : -20Hz ~ 20kHz
Direction Characteristic: Omni Directional
Signal to Noise Ratio: 70dB
Dynamic Range: 104dB(1kHz at max, dB SPL)
Max. sustainable sound pressure : 120dB
Output Impedence: 600 Ohm (non-equilibium)
Output Signle Amplitude: 2.5Vpp/-25dB
Working Voltage: 12V(9~15V)
Working Current: 60mA(5~100mA)
Working temperature: -30°C ~ 70°C
Size: 63 x 30 x 22mm
Weight: 73g

External Weatherproof Microphone For CCTV

Weatherproof Microphone for CCTV or IP cameras

£49.99

Out Of Stock

Weatherproof Microphone for CCTV or IP cameras.

A microphone and preamplifier Fitted in to a small IP65 case
Covert Style
Effective range of 10 metres @ 360 degrees
Covers an area of up to 10 square metres
12v DC 20mA
Size: 120 x 97 x 55mm

This microphone is designed for fitting outside or in any area where water may splash on to it. Feed the output into an audio enabled IP camera or to one of our DVRs to listen to live audio or record audio along with the camera picture.

Out Of Stock

Social Media
Copyright-Banner