Connection And Mounting Box For PTZ Domes

Make connections in bracket
IP66 Waterproof
Wall mount fixing holes
Aluminium
Dimension (W x H x D): 297 x 248 x 107mm
Pipe Thread: M20(G1/2")
Operating Temperature: -40°C~+60°
Humidity: 0~90% RH
Load Bearing: 8.0Kg
Weight: 3.2Kg

This weatherproof connection box is ideal for making the connections to our PTZ domes outside. Connections are kept dry inside the box and the box can be secured to the mounting wall and the camera easily bolted to it via the pre-drilled holes which match the fixing holes of our range of PTZ cameras.

The Lid of the box is hinged to allow easy access to the connections inside without removing the camera from its fixings. 

Pole Mount Swan Neck For PTZ Dome 

This swan neck mount is designed for fixing to the top of a camera pole, tower or column and provides a good overhang to increase the domes visibility.

Swan neck mounts via 4 x screws at the base and the top is drilled and slotted to accept the Camsecure range of HDCVI and IP PTZ dome cameras.

The swan neck can also be screwed to the top of a wall or beam if required.
Cabling for the dome passes up through the hollow swan neck so no wiring is visible once fitted.

Parapet Swan Neck PTZ Bracket 

Swan neck Parapet bracket for our PTZ cameras, bolts to top surface of Parapet

Parapet Mount
Aluminium
Cream Colour - Powder Coated
10kg load capacity
Anti-drop structure
Size: 346 x 121 x 700mm

Parapet Heavy Duty PTZ Bracket 

Heavy Duty Parapet bracket for our PTZ cameras, bolts to rear of Parapet wall and camera pole with camera overhanging forclear view of surrounding area can be rotated to bring camera withing reach from behind for easy access and maintenance.


Rotatable for Easy Access
Aluminium
Cream Colour - Powder Coated
10kg load capacity
Size: 879 x 836 x 180mm

Drop Pole Mount for PTZ Cameras

Drop pole mount for PTZ cameras, mount fixes to secure point on the ceiling or ceiling void, girder or other suitable load bearing structure. The drop pole(s) then attach to the base down to the level required.

Material: Aluminum & PC
IP Rating: N/A
Dimension (W x H x D): 133.6mm x 235.5mm
Pipe Thread: G1 1/2"
Operating Temperature: -40°C~+60°
Humidity: 0~90% RH
Load Bearing: 7.0Kg
Weight: 0.75Kg

Drop Pole for PTZ Dome Cameras

Drop pole tubes for extending the distance between the PTZ dome and the drop pole mount in 600 mm lengths. Poles thread together to make the desired length.

Material: Aluminum
IP Rating: N/A
Dimension (W x H x D): 53mm x 420mm
Pipe Thread: G1 1/2"
Operating Temperature: -40°C~+60°
Humidity: 0~90% RH
Load Bearing: 7.0Kg
Weight: 1.0Kg

Dome Collar/Adaptor

Collar to adapt our range of HD CVI and IP - PTZ domes to fit our drop pole and swan neck brackets perfectly.

Material: Aluminium
IP Rating: N/A
Dimension (W x H x D): 60mm x 50mm
Pipe Thread: G1 1/2"
Operating Temperature: -40°C~+60°
Humidity: 0~90% RH
Load Bearing: N/A
Weight: 0.25Kg

Corner Mount Bracket for our PTZ Dome Cameras

Material: SECC
IP Rating: N/A
Dimension (W x H x D): 243mm x 170mm x 138mm
Pipe Thread: N/A
Operating Temperature: -40°C~+60°
Humidity: 0~90% RH
Load Bearing: 10.0Kg
Weight: 1.7Kg

This neat design bracket allows our range of PTZ Dome cameras to be fitted to the outside corner of a wall.
This then permits a much wider angle of vision as the camera can rotate to view down both the sides of the building where fitted and anywhere within the arc.

Pole Mount Camera Bracket 

Material: SECC
IP Rating: N/A
Dimension (W x H x D): 130.4mm x 170mm x 45mm
Pipe Thread: N/A
Mast Diameter: 80~130mm
Operating Temperature: -40°C~+60°
Humidity: 0~90% RH
Load Bearing: 10.0Kg
Weight: 1.0Kg

Our pole mount bracket is pre-drilled to accept our range of IP and HD CVI camera's and PTZ domes.

The bracket is secured to the pole via large Jubilee clips and the camera secured to the bracket using the pre-drilled fixing positions.

You need to make sure that the pole has sufficient strength to support the load and also that the pole does not wobble excessively which could spoil the picture.