Camsecure Page Header Graphic
Camsecure Page Header 1200
Underwater Logo
Underwater Camera Submarine Style 

The Camsecure Submarine Style Underwater Camera is designed as a tool for carrying out inspections beneath the waters surface and for use in pools ponds and fishtanks. The submersible camera has two heavy stainless steel weights ensuring that the underwater camera can sink easily with the correct orientation and makes manoeuvring it for the correct view much easier than if it were bobbing about with inadequate ballast. They also enable the camera to site happily on the bottom of a tank or pool.

The underwater camera provides a high quality colour picture even in poor lighting conditions due to its built in bright white LED lights which can be disabled if required at the remote end by unplugging their power feed. Resolution is 420 TVL and the video output is standard composite video 1 Volt P-P (CVBS).

Underwater Submarine Style Camera Only

Underwater Submarine Style Camera

£115.99

Out Of Stock

Underwater Camera Specification

Sensor - 1/3" colour CCD
Pixel Resolution - 512(H) x 492(V) EIA - 500(H) x 582(V) CCIR
Resolution 600TVL
Video 1V P-P Composite video at 75 ohm termination
Lens 3.6mm
Aperture F/2.0
White LED's (24) for illumnation (can be disabled)
Power Adapter: Output 12VDC/1.5A; Input: 100-240VAC, 50-60Hz
Dimensions: 95mm x 170mm
Maximum Depth: 18 metres
Fitted Cable Length: 20 metres

Also available in carry case with LCD monitor!

More underwater camera products can be found here

The underwater camera comes with a 20 metre cable and is designed to operate at depths down to 18metres, a truly marine camera.

The submersible camera can be viewed on a standard analogue video monitor and can also be purchased in a transportable cased kit which includes a mains power supply, a 12 volt auxillary input and small LCD monitor for instant viewing. 

Social Media
Copyright-Banner